SA Centrifugal Pump

The DESMI SA self-priming centrifugal pump
Up to 650 m3/h (2900 US gpm)

 

Request Quote

 

The diffuser principle in the self-priming DESMI SA centrifugal pump means that the priming capacity is not dependent on valves or other mechanical elements since it is the liquid flow which carries the air.

Within the Marine industry the pumps are suitable as:

  • Bilge pumps
  • Ballast pumps
  • Fire pumps
  • Cooling water pumps
  • Wash-deck pumps
  • Fuel pumps
  • Wellpoint pumps
  • Irrigation pumps
  • Circulation pumps

 

Within Aquaculture industry the pumps are suitable as:

  • Freshwater
  • Waiter with additives
  • Seawater
  • Oils up to 500 cSt

 

RAS Applications:

  • Scretting Pumps
  • Miscellaneous

Within Industrial and Utility applications the pumps are suitable for:

  •  Draining building excavations
  • Emptying ponds, drains, and swimming pools
  • Water extraction for irrigation and watering
  • General service pumps
  • Fuel handling
  • Condensate extraction pumps

Advantages

 

Open impeller design

  • Semi-open, non clogging high efficiency impeller allowing the pump to operate on dirty water.

 

Replaceable wear plate

  • To keep the pump at max. capacity even after working with abrasive fluids for a long time, the tolerance between impeller and wear plate may be adjusted by way of shims behind the replaceable wear plate.

 

Mechanical shaft seal

  • A reliable, spring-loaded, mechanical shaft seal ensures rapid suction, and shaft wear and stuffing box tightening are avoided.

 

Check valve mounted at a high level

  • The pump check valve is mounted well above the impeller inlet. Consequently, the pump will not - in case of a check valve leakage - lose the priming water which would result in a loss of priming ability.

 

Heavy bearing design

  • Heavy shaft and bearing design provide long life even in case of belt drive.
Nominal diameter (DN) 20 to 200
Flow rate - 50 Hz Up to 610 m³/h (2700 US gpm)
Flow rate - 60 Hz Up to 730 m³/h (3200 US gpm)
Head Up to 115 m (375 ft)
Temperature Up to 140°C (284°F)
Motor Standard and EX motors
VFD Direct or Bulkhead/Wall-mounted
Download Brochures

SA

English
  • English
  • American
  • Dutch

SA (for industrial applications)

English
  • English
  • Danish
  • French
  • American
Download Manuals

SA (T1345)

English
  • English
  • Danish
  • Russia
  • German
  • Polish
  • French

SA25, SA35, SA50 - Monobloc Design (T1517)

English
  • English
  • Russia
50 Hz

PDF

 

960 RPM  1450 RPM  2950 RPM


 

JPG

 

960 RPM  1450 RPM  2950 RPM


 

60 Hz

PDF

 

1152 RPM  1740 RPM  3540 RPM


 

JPG

 

1152 RPM 1740 RPM 3540 RPM


 

3D DRAWINGS

 

SA 25 122

 

SA 35 135 12 

 

SA 50 180 4

 

 

 

SA 65 250 6 8 17

 

SA 80 160 A&D

DESMI AFTER SALES

SPARE PARTS

Selection programs

Find curves for existing pumps, get GA drawings for initial designs and compare efficiency, motor power, NPSH and other data to find the right pump.

DESMI Centrifugal Pumps

The range of centrifugal pumps is made to meet the requirements of a wide array of different applications. Be it district heating, cooling, HVAC, fire-fighting or perhaps pumps for the engine room of a maritime vessel, a centrifugal pump is often the ideal choice.

DESMI's centrifugal pumps are characterised by high-level efficiency and low NPSH values. Our vertical pumps require minimal space and provide easy access for maintenance of the pump's rotating parts.

Global Contacts

DESMI is a global company

Find address and contact information of our global locations


Join our newsletter

Sign up for our newsletter and we'll send you the latest headlines directly to your inbox.