ROTAN® GP Internal Gear Pump
Simple and compact construction for non-abrasive liquids
General Purpose Internal gear pumps in cast iron, for clean, non-abrasive liquids. The simple and compact construction makes it a low-cost pump, often used in modified versions by OEM customers.
A close-coupled OEM model is also available. GP pumps are designed for use with IEC or NEMA flange motors.
Pumping of:
- Clean oil
- Glycol
- Vegetable oil
- Solvents
- Lube oil
- Waste oil
- Fish oil
Key features and benefits
- Flexible sealing options
- Opposing inlet and outlet connections with oversized ports
- Shaft supported by two ball bearings in single sealed configuration
- Self-priming with large suction capabilities
- Low NPSH requirements
- Self-draining, integral safety relief valve
- No speed reduction required in six smaller sizes
- Complete heating/cooling jacketing available
| Capacity Range: | Up to 50 m3/h / 220 gpm |
| Speed: | Up to 1750 rpm |
| Differential Pressure: | Up to 16 bar / 232 psi |
| Suction Lift: | Up to 0,5 bar / 7.25 psi vacuum while priming Up to 0,8 bar / 11.6 psi vacuum while pumping |
| Viscosity Range: | Up to 7500 cSt |
| Temperature: | Up to 150°C / 302° F |
Download Brochures
ROTAN GP (General Purpose)
English
- English
- Danish
- Polish
- French
- American
ROTAN Main brochure
English
- English
- Russia
- Czech
- Turkish
- Polish
- Swedish
- Danish
- Portugese
- Dutch
- Italian
- French
- Finnish
- Spanish
- German
- Chinese
- American
Download Manuals
ROTAN Internal Gear Pump - GP, HD, PD, CD, ED, CC (T1456)
English
- English
- American
- Turkish
- Swedish
- Russia
- Portugese
- Polish
- Dutch
- Latvia
- Italian
- Greek
- French
- Finnish
- Spanish
- Bulgarian
- Czech
- German
- Danish
Dimensional sketches
English
- English
- American
